Telerik.Reporting
Represents an arrow shape.
Represents shape with rounded corners.
Base class for all shape types.
Initializes a new instance of the
with
zero angle of rotation.
Initializes a new instance of the
with
the specified angle of rotation in degrees.
A double value specifying the angle of rotation of the
shape in degrees.
When overridden this method should create the shape.
Adds a straight line to the shape.
The statr point of the line.
The end point of the line.
Adds a series of straight lines to the shape.
A point array representing the starting and ending points of the
lines.
A boolean value specifying whether to close the shape.
Adds a Bezier curve to the shape.
A point array representing the points of the Bezier curve.
Adds an ellipse to the shape.
The bounding rectangle of the ellipse.
Recreates the shape.
Gets the angle of rotation of this shape in radians.
A double value representing the angle of rotation of this
shape in radians.
Gets or sets the bounds of this shape.
A structure representing
the bounds of this shape.
Initializes a new instance of the
with the specified angle of rotation in degrees.
A double value specifying the angle of rotation of the
shape in degrees.
An int value between 0 and 100 specifying the rounding of
the edges in percentage.
Creates the shape.
When overridden this method should create shape
that will be rounded using the RoundVertexOp operator.
Gets or sets the rounding factor for the shape.
A double value between 0 and 100 specifying the rounding
factor of the shape in percentage. 0 means no rounding, 100 means full rounding.
Initializes a new instance of the
with
zero angle of rotation.
Initializes a new instance of the
with
the specified angle of rotation in degrees.
A double value specifying the angle of rotation of the
shape in degrees.
An int value between 0 and 100 specifying the rounding of
the edges in percent.
Creates the raw shape.
Returns a human-readable representation ot this
.
A human-readable representation ot this
.
Represents a Bezier curve segment of a shape.
Represents a shape segment.
Gets the points of this segment.
A point array representing the points of the segment.
Initializes a new instance of the
class
with the specified points.
A point array representing the points of the segment. The array
should contain 4 points -- start, control1, control2 and end.
Gets the points of this segment.
A point array representing the points of the segment.
Gets the start point of this segment.
The start point of the segment.
Gets the first control point of this segment.
The first control point of the segment.
Gets the second control point of this segment.
The second control point of the segment.
Gets the end point of this segment.
The end point of the segment.
Represents an cross shape.
Initializes a new instance of the
with
zero angle of rotation.
Initializes a new instance of the
with
the specified angle of rotation in degrees.
A double value specifying the angle of rotation of the
shape in degrees.
An int value between 0 and 100 specifying the rounding of
the edges in percent.
Creates the raw shape.
Returns a human-readable representation ot this
.
A human-readable representation ot this
.
Represents an ellipse segment of a shape.
Initializes a new instance of the
class
with the specified points.
A structure representing
the bounding rectangle of the segment.
Gets the bounding rectangle of the segment.
A structure representing
the bounding rectangle of the segment.
Gets the points of this segment.
A point array representing the points of the segment.
Represents an ellipse shape.
Initializes a new instance of the
with
zero angle of rotation.
Initializes a new instance of the
with
the specified angle of rotation in degrees.
A double value specifying the angle of rotation of the
shape in degrees.
Creates the shape.
Returns a human-readable representation ot this
.
A human-readable representation ot this
.
Represents the direction of a line in a shape.
Vertical line
Horizontal line
Top-Right - Bottom-Left line
Top-Left - Bottom-Right line
Represents line segment of a shape.
Initializes a new instance of the
class
with the specified points.
The start point of the line segment.
The end point of the line segment.
Gets the points of this segment.
A point array representing the points of the segment.
Gets the start point of this segment.
The start point of the segment.
Gets the end point of this segment.
The end point of the segment.
Gets the length of the line.
A float value representing the lenght of the line segment.
Represents a line shape.
Initializes a new instance of the
with EW line direction.
Initializes a new instance of the
with
specified line direction.
The direction of the line.
Creates the shape.
Returns a human-readable representation ot this
.
A human-readable representation ot this
.
The circle in polar coordinates.
x = x0 + R*cos(Alpha)
y = y0 + R*sin(Alpha)
Center of the circle
Radius of the circle
An angle, measured in radians
Returns the center of point of a rectangle
Returns the scaling factor to stretch the size of the source rectangle
to the size of the destination rectangle.
Rectangle to stretch
Rectangle to which the src rectangle will be stretched
if true the source rectangle will be scaled proportional by width and height;
otherwise the width/height ratio won't be preserved.
Factor [0 - 1]
0 - result === start
1 - result === end
Represents a polygon shape.
Represents the base class for all polygon shapes.
Initializes a new instance of the
with
the specified vertex count and angle of rotation in degrees.
The number of vertices of the polygon.
A double value specifying the angle of rotation of the
shape in degrees.
An int value between 0 and 100 specifying the rounding of
the edges in percent.
Creates the raw shape.
Gets the points of this shape.
The bound of the shape.
A point array representing the points of this shape.
Gets the core points for this shape.
The center of the shape.
The number of segments of the shape.
The radius of the shape.
The angle of rotation of the shape.
A point array representing the core points of this shape.
Initializes a new instance of the
with
3 vertexes and zero angle of rotation.
Initializes a new instance of the
with
the specified vertex count and zero angle of rotation.
The number of vertices of the shape.
Initializes a new instance of the
with
the specified vertex count and angle of rotation in degrees.
The number of vertices of the shape.
A double value specifying the angle of rotation of the
shape in degrees.
An int value between 0 and 100 specifying the rounding of
the edges in percent.
Gets the points of this shape.
The bound of the shape.
A point array representing the points of this shape.
Returns a human-readable representation ot this
.
A human-readable representation ot this
.
Scans the shape segments and for any 2 consecutive lines
splits the longer line in 2 parts so the vertex
will occur between 2 equal lines.
L2
+-----
/ L1' == L2
L1 ./
/
/ L1"
/
Represents a star shape.
Initializes a new instance of the
with
3 vertexes, 50% concavity, and zero angle of rotation.
Initializes a new instance of the
with
the specified vertex count, 50% concavity, and zero angle of rotation.
The number of vertices of the shape.
Initializes a new instance of the
with
the specified vertex count, concavity, and angle of rotation in degrees.
The number of vertices of the shape.
The concavity in percent of the shape.
A double value specifying the angle of rotation of the
shape in degrees.
An int value between 0 and 100 specifying the rounding of
the edges in percent.
Gets the points of this shape.
The bound of the shape.
A point array representing the points of this shape.
Returns a human-readable representation ot this
.
A human-readable representation ot this
.
Gets or sets a percent value specifying the concavity of the shape.
An int value between 0 and 100 specifying the concavity
of the shape in percentage.
Represents a selector that matches a property value of a report item.
Selectors are defined for each
in the
.
AttributeSelector should be used when you want to match all
report items of a certain Type that have a property set to a
certain value.
Provides the abstract base class for an attribute selector.
Selectors are defined for each
in the
.
Represents a selector base on a
Allows an object to implement a style selector, and represents a set
of methods to match a
and clone the selector.
Matches a based on
certain criteria.
The to match.
true if item matches; otherwise false.
Shortcut for all built-in types: appear as type names only in the type selector
Initializes a new type that matches any type of report item.
Initializes a new instance of the
class that
matches any type of report item.
Initializes a new instance of the
class that
matches items of the specified type.
The that this selector
matches.
Matches a based on
its type.
The to match.
true if item matches; otherwise false.
Performs a deep clone of the
.
The cloned
Copies this TypeSelector to the specified typeSelector.
The to copy
to.
Called when the
of this
selector changes.
Creates a human-readable string that represents this
.
A string that represents this TypeSelector.
Gets or sets the that this selector
matches.
A value to match.
The property descriptor associated with the property that this
selector matches.
The name of the property to match.
The value of the property to match.
Initializes a new instance of the AttributeSelectorBase
class with an empty property name and value, that matches all
objects.
Initializes a new instance of the AttributeSelectorBase
class with the specified property name and value, that matches all
objects.
A string value indicating the property name to match.
A string value indicating the property value to match.
Initializes a new instance of the AttributeSelectorBase
class with the specified property name and value, that matches
items of the specified type.
A value indicating the type of the items
to match.
A string value indicating the property name to match.
A string value indicating the property value to match.
Copies the property name and value of the selector to the target
typeSelector.
The to copy
to.
Matches a report item by the value of its property.
The to match.
true if the item's property value matches.
This member overrides
A string value describing the selector.
This member overrides
.
The method resets the selector.
Gets or sets the name of the property to match.
The name of the property to match.
Gets or sets the value of the property to match.
The value of the property to match.
Default ColorPalette
Represents a background image associated with a
Initializes a new instance of the BackgroundImage class as
a member of the given
A value representing
the parent style of the BackgroundImage.
Gets or sets a
value
defining the repeat style of the BackgroundImage.
A value
representing the repeat style of the BackgroundImage.
Gets or sets a containing the
image data of this BackgroundImage.
A object containing the
image data of this BackgroundImage.
Use this property if you want to bind the BackgroundImage
to an image that is not in the data source.
Gets or sets the MIME type of the current
object.
The MIME type of the current BackgroundImage object.
Indicates how a background image will be repeated.
The background-image will be displayed only once.
The background image will be repeated horizontally.
The background image will be repeated vertically.
The background image will be repeated vertically and horizontally.
A class used to specify the color of the border of an item.
Gets or sets the default color of the border.
The default border .
Gets or sets the top color of the border.
The top border .
Gets or sets the bottom color of the border.
The bottom border .
Gets or sets the left color of the border.
The left border .
Gets or sets the right color of the border.
The right border .
A class used to specify the color of the border of an item.
A class used to specify the style of the border of an item.
Gets or sets the default style of the border.
A object
specifying the default border style.
Gets or sets the top style of the border.
A object
specifying the top border style.
Gets or sets the bottom style of the border.
A object
specifying the bottom border style.
Gets or sets the left style of the border.
A object
specifying the left border style.
Gets or sets the right style of the border.
A object
specifying the right border style.
Specifies the type of a border.
No line.
A dotted line.
A dashed line.
A solid line.
A double solid line.
A grooved line for a sunken border appearance.
A ridged line for a raised border appearance.
An inset line for a sunken item appearance.
An outset line for a raised item appearance.
A class used to specify the width of the border of an item.
Gets or sets the default width of the border.
A
specifying the default border width.
Gets or sets the top width of the border.
A
specifying the top border width.
Gets or sets the bottom width of the border.
A
specifying the bottom border width.
Gets or sets the left width of the border.
A
specifying the left border width.
Gets or sets the right width of the border.
A
specifying the right border width.
Converts the collection to string returning the count of items in it.
Parameter; Binding ...
Parameters; Bindings ...
Represents a selector that matches an item that is a descendant of
another item.
At times, authors may want selectors to match an item that is the
descendant of another item in the report item tree (e.g., "Match those
TextBox elements that are contained by a Panel element"). Descendant
selectors express such a relationship in a pattern.
Initializes a new instance of the DescendantSelector.
Initializes a new instance of the DescendantSelector
class with the specified selectors.
A array
containing the selectors that define the descendance pattern used
to match the item.
Matches a report item based on the descendance pattern defined by
the
of this selector.
The to match.
true if the item matches the descendance pattern.
This member overrides
A string value describing the selector.
Gets a
containing the selectors that define the descendance pattern used
to match the item.
Represents an external style sheet used to style a report.
Initializes a new instance of the class.
Creates a new ExternalStyleSheet with the given resource identifier.
The identifier for the resource
containing the external style sheet. This parameter can be an
absolute or relative filepath, an absolute or relative URL, or the
name of an embedded resource.
Creates a new ExternalStyleSheet by loading it from the specified
stream.
The stream to load from.
Creates a new ExternalStyleSheet by loading it from the specified
Uri.
The Uri to load from.
Represents a collection of
objects.
Each time an
object is inserted, deleted or set in this collection, the
that owns the collection is
refreshed by re-applying or internal and external style sheets.
ExternalStyleSheetCollectionConverter
ExternalStyleSheetConverter
Defines a particular format for text, including font face, size, and
style attributes.
This member overrides
A string value describing the Font.
Converts the specified reporting
to a
.
The to convert.
The that is converted from the
specified reporting Font structure.
Gets or sets the face name of this
.
A string representation of the face name of this Font.
Gets or sets the size of this
measured in
s.
The size of this
Font.
Gets a value that indicates whether this
is bold.
true if this Font is bold; otherwise, false.
Gets a value that indicates whether this
is italic.
true if this Font is italic; otherwise, false.
Gets a value that indicates whether this
is underlined.
true if this Font is underlined; otherwise, false.
Gets a value that indicates whether this
specifies a horizontal
line through the font.
true if this Font has a horizontal line through it;
otherwise, false.
Gets or sets style information for this
.
A enumeration that contains
style information for this Font.
Represents a base class for all Telerik Reporting objects
This method supports the Telerik Reporting infrastructure
and is not intended to be used directly from your code.
Style to copy the values from.
Style to copy the values to.
Indicates whether to copy all the style properties of the src style (if true)
or only the explicitly set values for the src style.
Indicates whether to copy only the different properties (if true)
or all style properties.
Indicates whether if the current rule is applied to proceed
with the next FormattingRule in the ReportItemBase.ConditionalFormattings
collection.
Specifies how an image is positioned within an item.
Grows or shrinks borders of the image item to fit the image.
The image is displayed in the center of the item.
If the image is larger than the item, the image is clipped.
Clips the image to fit the height and width of the item.
Resizes the image to match the height and width of the item.
Resizes the image to match the height and width of the item,
preserving the aspect ratio.
Specifies the type of a line item
A solid line.
A dashed line.
A dotted line.
Gets or sets a value defining the minimal lightness of the generated colors
Value between 0M and 0.5M
Gets or sets a value defining the maximal lightness of the generated colors
Value between 0.5M and 1M
Represents padding information associated with a report item.
The padding is the internal space between the body of the item and its
edge.
Padding has a different effect on report items that are containers than
on report items that are not. For example, in a
item, the Padding property
defines the spacing between the border of the Panel and its
child items. For a item, the
Padding property defines the spacing between the border of the
TextBox item and its contained text.
Initializes a new instance of the Padding class as
a member of the given
A value representing
the parent style of the Padding.
This member overrides
A string value listing the Padding's members.
Gets or sets the padding value for the left edge.
The padding, in s, for
the left edge.
Gets or sets the padding value for the right edge.
The padding, in s, for
the right edge.
Gets or sets the padding value for the top edge.
The padding, in s, for
the top edge.
Gets or sets the padding value for the bottom edge.
The padding, in s, for
the bottom edge.
Specifies settings that apply to a single, printed page.
The PageSettings class is used to specify settings that modify
the way a page will be printed.
Initializes a new instance of the PageSettings
class with the specified
and
.
A object
specifying the landscape and paper kind.
A object
specifying the papers size and margins.
This member implements
The cloned PageSettings.
Returns a
object based on the given
parameter.
A object
from which to create the
.
A object
initialized from the printerSettings.
Gets or sets the paper kind for the page.
A that represents
the kind of the paper.
Gets or sets the paper size for the page.
A that represents
the size of the paper.
Gets or sets a value indicating whether the page is printed in
landscape or portrait orientation.
true if the page should be printed in landscape orientation;
otherwise, false.
Gets or sets the margins for this page.
A that represents
the margins for the page.
Specifies a collection of watermarks for the page.
Gets or sets a value that specifies how many columns are present
in the of the report.
An integer value specifying the number of columns.
The value should be equal to or greater than 1. The default is 1.
Column widths are calculated based on the following rule:
DetailWidth = ColumnWidth * ColumnCount +
ColumSpacing * (ColumnCount - 1)
Multi-column reports are primarily used for printing labels.
Gets or sets a value indicating the space in Units between two
adjacent columns.
A value specifying the
space between two adjacent columns. The value should be a
non-negative Unit. The default is
This property should be used when there should be some blank space
left between adjacent columns.
Gets or sets the background color of the page.
A that represents the background
color of the page. The default is
, which indicates that this
property is not set.
Use the BackColor property to specify the background color
of the page. This property is set using a
object.
Gets a object
used to define the page border style.
A representing
the page border style.
You can set the page border style by using the properties
,
,
,
, and
.
The Default property is used to set all borders styles at
once. All borders are
BorderType.None by default.
Gets a object
used to define the page border color.
A representing
the page border color.
You can set the page border color by using the properties
,
,
,
, and
.
The Default property is used to set all borders colors at
once. All borders are
by default.
Gets a object
used to define the page border width.
A representing
the page border width.
You can set the page border width by using the properties
,
,
,
, and
.
The Default property is used to set all borders widths at
once. All borders are 1pt wide by default.
Gets a
object that controls the image displayed in the background of the
page.
An that
represents the image to display in the background of the report
item. Report items have no background image by default.
Non-expandable SizeU Converter
Represents a picture watermark on a printable page.
Represents a watermark on a printable page.
Gets or sets the position of the watermark relative to the other
items on the printable page.
A value
that specifies the position of the watermark relative to the other
items on the printable page.
Gets or sets the opacity of the watermark when combining it with the
other items on the printable page.
A value that specifies the opacity of the watermark when combining it
with the other items on the printable page.
The value can be specified in the range from 0.0 to 1.0, where 0.0 is
completely transparent, while 1.0 is completely opaque. Any other value
outside that range is clamped to the closest allowed value.
Gets or sets a value indicating whether to print the watermark on
the first printable page of the report.
A boolean value indicating whether to print the watermark on the
first printable page of the report.
Gets or sets a value indicating whether to print the watermark on
the last printable page of the report.
A boolean value indicating whether to print the watermark on the
last printable page of the report.
Gets or sets the image of the watermark to be printed on the page.
The image of the watermark to be printed on the page.
The specified image can be in one of the following supported formats:
an object instance inherited from ;
an array of bytes containing binary image data; a local file path
or an URL to an external image file. Instead of providing the image
directly, it is possible to specify it indirectly as an expression
that is evaluated at runtime for each printable page. If the image
is null (Nothing in Visual Basic), or if the specified expression
evaluates to null (Nothing in Visual Basic), the watermark is not
printed on the current page.
The following expression prints a watermark on every second page:
= IIf(PageNumber % 2 = 0, "Watermark.png", Null)
Gets or sets the sizing mode of the watermark image on the printable page.
A value that
specifies the sizing mode of the watermark image on the printable page.
Represents an ordered pair of unit-based point x- and y-coordinates
that defines a point in a two-dimensional plane.
Represents a new instance of the
class with member
data left uninitialized.
Initializes a new instance of the PointU class with the specified
coordinates.
The horizontal position of the point.
The vertical position of the point.
Translates the PointU by the specified SizeU.
The to translate.
The that specifies
the numbers to add to the x- and y-coordinates of the
PointU.
The translated PointU.
The op_Addition operator adds the
of the
specified size to the x-coordinate of the PointU and the
to the
y-coordinate of the PointU.
Translates the PointU by the negative of a specified
SizeU.
The to translate.
The that specifies
the numbers to subtract from the x- and y-coordinates of the
PointU.
The translated PointU.
The op_Subtraction operator subtracts the
of the
specified size from the x-coordinate of the PointU and the
from the
y-coordinate of the PointU.
Compares two PointU structures. The result specifies whether
the values of the
and properties of
the two PointU structures are equal.
A to compare.
A to compare.
true if the X and Y values of the left and
right PointU structures are equal; otherwise, false.
Determines whether the coordinates of the specified points are not
equal.
A to compare.
A to compare.
true to indicate the
and
values of
pt1 and pt2 are not equal; otherwise, false.
Converts the specified reporting
to a
.
The to convert.
The that is converted from the
specified reporting Point structure.
Converts the specified reporting
to a
.
The to convert.
The that is converted from the
specified reporting Point structure.
Specifies whether this
contains the same
coordinates as the specified Object.
The to test.
This method returns true if obj is a PointU
and has the same coordinates as this
.
Returns a hash code for this
structure.
An integer value that specifies a hash value for this PointU
structure.
Converts this to a
human readable string.
A string that represents this PointU.
Converts this to a
human readable string according to the
specified.
A that is used to
format the string.
A string that represents this PointU.
Offsets this
structure by a specified amount in the x- and y-direction.
A value specifying
the amount to offset in the horizontal direction.
A value specifying
the amount to offset in the vertical direction.
Gets or sets the x-coordinate of this
The x-coordinate of this PointU.
Gets or sets the y-coordinate of this
The y-coordinate of this PointU.
Gets a value indicating whether this
is empty.
true if both
and
are equal to zero;
otherwise, false.
Stores a set of four Unit-based numbers that represent the location and
size of a rectangle.
A RectangleU is defined by its width, height, and upper-left
corner.
Represents an instance of the
class with its
members uninitialized.
The members of the new RectangleU are left uninitialized.
Initializes a new instance of the
class from the
specified .
A that represents the
rectangular region.
Initializes a new instance of the
class from the
specified .
A that represents the
rectangular region.
Initializes a new instance of the
class with the
specified location and size.
A that represents
the upper-left corner of the rectangular region.
A that represents the
width and height of the rectangular region.
Initializes a new instance of the
class with the
specified location and size.
The x-coordinate of the upper-left corner of the rectangle.
The y-coordinate of the upper-left corner of the rectangle.
The width of the rectangle.
The height of the rectangle.
Tests whether two RectangleU structures have equal location
and size.
The structure
that is to the left of the equality operator.
The structure
that is to the right of the equality operator.
This operator returns true if the two specified
RectangleU structures have equal
,
,
, and
properties.
Tests whether two RectangleU structures differ in location
or size.
The structure
that is to the left of the equality operator.
The structure
that is to the right of the equality operator.
This operator returns true if any of the
,
,
, or
properties of the two
structures are unequal; otherwise false.
Converts the specified RectangleU structure to a
structure.
The structure
to convert.
The Rectangle structure that is converted from the specified
RectangleU structure.
Converts the specified RectangleU structure to a
structure.
The structure
to convert.
The RectangleF structure that is converted from the specified
RectangleU structure.
Determines if the specified point is contained within this
RectangleU structure.
The x-coordinate of the point to test.
The x-coordinate of the point to test.
This method returns true if the point defined by x
and y is contained within this RectangleU structure;
otherwise false.
Determines if the specified point is contained within this
RectangleU structure.
The to test.
This method returns true if the point represented by the
pt parameter is contained within this RectangleU
structure; otherwise false.
Determines if the rectangular region represented by rect is
entirely contained within this RectangleU structure.
The to test.
This method returns true if the rectangular region
represented by rect is entirely contained within the
rectangular region represented by this RectangleU; otherwise
false.
Inflates this RectangleU structure by the specified amount.
The amount to inflate this
structure
horizontally.
The amount to inflate this
structure
vertically.
Inflates this RectangleU structure by the specified amount.
The amount to inflate this rectangle.
Inflates rect by the specified amount.
The structure
to inflate.
The amount to inflate this
structure
horizontally.
The amount to inflate this
structure
vertically.
The inflated RectangleU structure.
Determines if this rectangle intersects with rect.
The rectangle to test.
This method returns true if there is any intersection;
otherwise false.
Adjusts the location of this rectangle by the specified amount.
The amount to offset the location.
Adjusts the location of this rectangle by the specified amount.
The amount to offset the location horizontally.
The amount to offset the location vertically.
Tests whether obj is a
with the same
location and size of this RectangleU.
The to test.
This method returns true if obj is a
RectangleU and its X, Y, Width, and
Height properties are equal to the corresponding properties
of this RectangleU; otherwise, false.
Converts the Location and Size of this
RectangleU to a human-readable string.
A human-readable representation of the rectangle.
Converts the Location and Size of this
RectangleU to a human-readable string.
A object according
to which to format the string.
A human-readable representation of the rectangle.
Returns a hash code for this
structure.
An integer value that specifies a hash value for this
RectangleU structure.
Gets or sets the x-coordinate of the upper-left corner of this
structure.
The x-coordinate of the upper-left corner of this RectangleF
structure.
Gets or sets the y-coordinate of the upper-left corner of this
structure.
The y-coordinate of the upper-left corner of this RectangleF
structure.
Gets or sets the width of this
structure.
The width of this RectangleF structure.
Gets or sets the height of this
structure.
The height of this RectangleF structure.
Gets or sets the coordinates of the upper-left corner of this
structure.
A that represents
the upper-left corner of this RectangleF structure.
Gets or sets the size of this
.
A that represents the
width and height of this RectangleU structure.
Gets the x-coordinate of the left edge of this
structure.
The x-coordinate of the left edge of this
RectangleU structure.
Gets the y-coordinate of the left edge of this
structure.
The y-coordinate of the left edge of this
RectangleU structure.
Gets the x-coordinate that is the sum of
and
of this
RectangleU structure.
The x-coordinate that is the sum of X and Width of
this RectangleU structure.
Gets the y-coordinate that is the sum of
and
of this
RectangleU structure.
The y-coordinate that is the sum of Y and Height of
this RectangleU structure.
Tests whether the
,
,
, and
properties of this
have a value of
zero.
This property returns true if the X, Y,
Width, and Height properties of this
RectangleU have a value of zero; otherwise, false.
Represents a collection of objects that implement
Initializes a new instance of the
class.
Adds an array of selector objects to the collection.
An array of
objects to add to the collection.
The ISelector objects contained in the
selectors array are appended to the end of the collection.
You can use the AddRange method to quickly add a
group of ISelector objects to the collection
instead of manually adding each ISelector to the
collection using the
method.
To remove a
that you
previously added, use the
,
,
or
methods.
Compares two ISelector instances.
Compares two ISelector instances.
-1 if x is weaker (less determinant) selector.
1 if y is weaker (less determinant) selector.
0 if x and y have the same weight
Stores an ordered pair of Unit-based numbers, typically the width and
height of a rectangle.
Initializes a new instance of the
class.
Initializes a new instance of the SizeU class from the
specified existing Size.
The from which to create the new
SizeU.
Initializes a new instance of the SizeU class from the
specified existing SizeF.
The from which to create the new
SizeU.
Initializes a new instance of the SizeU class from the specified
dimensions.
The width component of the new
.
The height component of the new
.
Adds the width and height of one SizeU structure to the
width and height of another SizeU structure.
The first to add.
The second to add.
A structure that is
the result of the addition operation.
Subtracts the width and height of one SizeU structure from
the width and height of another SizeU structure.
The on the left side
of the subtraction operator.
The on the right side
of the subtraction operator.
A structure that is
the result of the subtraction operation.
Tests whether two SizeU structures are equal.
The structure on the
left side of the equality operator.
The structure on the
right side of the equality operator.
This operator returns true if size1 and size2
have equal width and height; otherwise, false.
Tests whether two SizeU structures are different.
The structure on the
left side of the equality operator.
The structure on the
right side of the equality operator.
This operator returns true if size1 and size2
differ either in width or height; false if size1 and
size2 are equal.
Converts the specified SizeU to a
.
The structure to be
converted.
The structure to which this
operator converts.
Converts the specified SizeU to a
.
The structure to be
converted.
The structure to which this
operator converts.
Tests to see whether the specified object is a
with the same
dimensions as this SizeU.
The to test.
This method returns true if obj is a
and has the same
width and height as this SizeU; otherwise, false.
Returns a hash code for this
structure.
An integer value that specifies a hash value for this SizeU
structure.
Creates a human-readable string that represents this
.
A string that represents this SizeU.
Creates a human-readable string that represents this
.
A object according
to which to format the string.
A string that represents this SizeU.
Gets or sets the horizontal component of this
.
The horizontal component of this SizeU.
Gets or sets the vertical component of this
.
The vertical component of this SizeU.
Gets a value indicating whether this
has zero width and
height.
This property returns true when this SizeU has both
a width and height of zero; otherwise, false.
Represents the style of a report item.
Gets or sets a value indicating whether the report item is
displayed.
true if the report item is displayed; otherwise,
false. The default is true.
Gets or sets the background color of the report item.
A that represents the background
color of the report item. The default is
, which indicates that this
property is not set.
Use the BackColor property to specify the background color
of the report item. This property is set using a
object.
Gets a
object that controls the image displayed in the background of the
report item.
An that
represents the image to display in the background of the report
item. Report items have no background image by default.
Gets or sets the foreground color of the report item.
The foreground of the report
item. The default is .
Gets or sets the horizontal indentation of the first line of text in the report item.
The indentation in s.
The default is
.
Gets or sets the horizontal alignment of text in the report item.
One of the
values.
The default is
HorizontalAlign.Left.
Gets or sets the vertical alignment of text in the report item.
One of the
values.
The default is VerticalAlign.Top.
Gets a object
used to define the border style of a report item.
A representing
the border style of the report item.
You can set the border style of the item by using the properties
,
,
,
, and
.
The Default property is used to set all borders styles at
once. All borders are
BorderType.None by default.
Gets a object
used to define the border color of a report item.
A representing
the border color of the report item.
You can set the border color of the item by using the properties
,
,
,
, and
.
The Default property is used to set all borders colors at
once. All borders are
by default.
Gets a object
used to define the border width of a report item.
A representing
the border width of the report item.
You can set the border width of the item by using the properties
,
,
,
, and
.
The Default property is used to set all borders widths at
once. All borders are 1pt wide by default.
Gets a object
representing the font of the report item.
A object used to
define the font of a report item. By default the font of a report
item is Arial-Regular, 10pts.
Gets a object
used to define the padding of a report item.
A object
representing the padding of the report item.
You can set the padding of the item by using the properties
,
,
, and
.
Padding on all sides is
by default.
Gets or sets a
object used to define the line style of report items that
support it, such as lines and shapes.
A object
representing the line style of the report item. By default the line
style is LineStyle.Solid.
Gets or sets a
representing the line width of report items that support it, such
as lines and shapes.
A value representing
the line width of the report item. By default the width is 1pt.
Performs the specified action on each registered Style property key.
Represents a style rule to be applied.
Initializes a new empty
.
Returns a human-readable representation ot this
.
A human-readable representation ot this
.
A collection of selectors that determine which report items the
style applies to.
A object
containing all of the selectors for this rule.
The to apply to all
report items selected by the
A object defining the
style of this
Represents a collection of
objects.
Initializes a new instance of the
class.
Adds an array of style rule objects to the collection.
An array of
objects to add to the collection.
The StyleRule objects contained in the
rules array are appended to the end of the collection.
You can use the AddRange method to quickly add a
group of StyleRule objects to the collection
instead of manually adding each StyleRule to the
collection using the
method.
To remove a
that you
previously added, use the
,
,
or
methods.
An attribute selector based on the style name property.
Initializes a new
.
Initializes a new
with the
specified style name.
A string value specifying the style name to
match.
Initializes a new
with the
specified style name, that matches items of the specified
The of items to match.
A string value specifying the style name to
match.
Returns a human-readable representation of this
.
A human-readable representation of this
.
Gets or sets the name of the style that this selector matches.
A string value representing the style name to match.
Represents a collection of styles for a
Specifies the vertical alignment of an object or text in a report item.
Specifies that the object is aligned to the left.
Specifies that the object is aligned to the center.
Specifies that the object is aligned to the right.
Represents a text watermark on a printable page.
Gets or sets the text of the watermark to be printed on the page.
A started with "=" is interpreted as
an expression to calculate the real data,
otherwise - literal string.
Supports embedded expressions also.
The text can be specified either directly as a string literal or
indirectly as an expression that is evaluated at runtime for each
printable page. If the text is null (Nothing in Visual Basic) or
an empty string, or if the specified expression evaluates to null
(Nothing in Visual Basic) or an empty string, the watermark is not
printed on the current page.
The following expression prints a watermark on every second page:
= IIf(PageNumber % 2 = 0, "Watermark", Null)
Gets or sets the color of the watermark text.
A value that specifies the color
of the watermark text without the transparency.
Gets or sets the orientation of the watermark text on the printable page.
A value that
specifies the orientation of the watermark text on the printable page.
Gets the font settings of the watermark text.
A value that specifies
the font settings of the watermark text.
A structure representing a unit of measure.
Initializes a new instance of the
structure.
Initializes a new instance of the
structure equal to
zero.
Creates a new
of type UnitType.Pixel and magnitude equal to value.
A double value specifying the magnitude of the Unit.
The created Unit.
Creates a new
of type UnitType.Pixel
and magnitude equal to value.
An int value specifying the magnitude of the Unit.
The created Unit.
Creates a new
of type UnitType.Point
and magnitude equal to value.
A double value specifying the magnitude of the Unit.
The created Unit.
Creates a new
of type UnitType.Point
and magnitude equal to value.
An int value specifying the magnitude of the Unit.
The created Unit.
Creates a new
of type UnitType.Cm
and magnitude equal to value.
A double value specifying the magnitude of the Unit.
The created Unit.
Creates a new
of type UnitType.Cm
and magnitude equal to value.
An int value specifying the magnitude of the Unit.
The created Unit.
Creates a new
of type UnitType.Mm
and magnitude equal to value.
A double value specifying the magnitude of the Unit.
The created Unit.
Creates a new
of type UnitType.Mm
and magnitude equal to value.
An int value specifying the magnitude of the Unit.
The created Unit.
Creates a new
of type UnitType.Inch
and magnitude equal to value.
A double value specifying the magnitude of the Unit.
The created Unit.
Creates a new
of type UnitType.Inch
and magnitude equal to value.
An int value specifying the magnitude of the Unit.
The created Unit.
Creates a new
of type UnitType.Pica
and magnitude equal to value.
A double value specifying the magnitude of the Unit.
The created Unit.
Creates a new
of type UnitType.Pica
and magnitude equal to value.
An int value specifying the magnitude of the Unit.
The created Unit.
Initializes a new instance of the
structure from the
specified pixels. The Unit's type is
A double value specifying the magnitude of the
in pixels.
Initializes a new instance of the
structure with the
specified value and type.
A double value representing the magnitude of the
Unit.
A specifying the
type of the Unit.
Initializes a new instance of the
structure from the
specified string value.
A string value representing the magnitude and type of the
Unit.
Parameters passed to this constructor should be of the form "2px",
"3.4in", "4cm", "2mm", "12.5pt", "4pc", etc. For more information
on string representations of units see
.
Initializes a new instance of the
structure from the
specified string value and using the specified
.
A string value representing the magnitude and type of the
Unit.
A . If a null
reference (Nothing in Visual Basic) is passed, the current
culture is assumed.
The culture parameters is used to parse the string value.
Initializes a new instance of the
structure from the
specified string value, culture, and type.
A string value representing the magnitude of the
Unit.
A . If a null
reference (Nothing in Visual Basic) is passed, the current
culture is assumed.
A specifying the
type of the Unit.
Parses a string value to create a new Unit.
A string value defining the unit.
The created Unit.
The parameter passed to this Method should be of the form "2px",
"3.4in", "4cm", "2mm", "12.5pt", "4pc", etc. For more information
on string representations of units see
.
Parses a string value to create a new Unit based on the
specified culture.
A string value defining the unit.
The object defining
the rules for the parsing.
The created Unit.
The parameter passed to this Method should be of the form "2px",
"3.4in", "4cm", "2mm", "12.5pt", "4pc", etc. For more information
on string representations of units see
.
Returns a unit equal to this
but with its type
changed.
The to change to.
A Unit equal to this Unit, but with type that equals
type.
Returns a that is the
sum of two units and is of the specified type.
The first Unit.
The second Unit.
A specifying the
type of the resultant unit.
The sum of the two units.
Returns a that is the
sum of two units and its unit type matches the first argument type.
The first Unit.
The second Unit.
The sum of the two units in the unit type of the first argument unit.
Returns a that is the
difference of two units and is of the specified type.
The Unit to subtract from.
The Unit to subtract.
The difference of the two units in the unit type of the first argument unit.
Returns a that is the
difference of two units and is of the specified type.
The Unit to subtract from.
The Unit to subtract.
A specifying the
type of the resultant unit.
The difference of the two units in the specified unit type.
Adds a unit to this .
The Unit to add.
The sum of unit1 and this Unit in this Unit's
type.
Subtracts a unit from this
.
The Unit to subtract.
The difference of this Unit and unit1 in this
Unit's type.
Multiplies this by a
specified value.
A double value to multiply by.
The product of multiplying this Unit by the specified
value.
Divides this by a
specified value.
A double value to divide by.
The quotient resulting by dividing this Unit by the
specified value.
Divides this by another.
A Unit value to divide by.
The quotient resulting by dividing this Unit by the
specified Unit.
Adds one to another.
The first Unit.
The second Unit.
The sum of the two units.
If unit1 is empty the method returns unit2. If
unit2 is empty the method returns unit1. Otherwise,
the method returns the sum of the two units in unit1's type.
Subtract one from
another.
The Unit to subtract from.
The Unit to subtract.
The difference of the two units.
Thrown when unit1 is empty.
If unit2 is empty the method returns unit1.
Otherwise, the method returns the difference of the two units
in unit1's type.
Unary minus. Reverses the sign of
The unit to negate.
A Unit of the same type as unit but with opposite
sign.
Multiplies a by a
specified value.
The Unit to multiply.
A double value to multiply by.
The product of unit1 and value.
Multiplies a value by a
.
The double value to multiply.
The Unit to multiply by.
A Unit that is the product of value and unit1.
Divides a by a
specified value.
The Unit to divide.
A double value to divide by.
A Unit that is the quotient of unit1 and
value.
Divides the first by the second.
A to divide.
A to divide by.
The quotient resulting by dividing of two Units.
Compares two units.
The first unit to compare.
The second unit to compare.
true if unit1 is less than unit2; otherwise
false.
Compares two units.
The first unit to compare.
The second unit to compare.
true if unit1 is greater than unit2; otherwise
false.
Compares two units.
The first unit to compare.
The second unit to compare.
true if unit1 is less than or equal to unit2;
otherwise false.
Compares two units.
The first unit to compare.
The second unit to compare.
true if unit1 is greater than or equal to
unit2; otherwise false.
Compares two units.
The first unit to compare.
The second unit to compare.
true if unit1 is equal to unit2; otherwise false.
Compares two units.
The first unit to compare.
The second unit to compare.
true if unit1 is not equal to unit2; otherwise
false.
Returns a hash code for this
structure.
An integer value that specifies a hash value for this
Unit structure.
Tests whether obj is a
that equals this
Unit.
The to test.
This method returns true if obj is a
Unit and its magnitude is equal to this Unit's
magnitude; otherwise false.
Returns the larger of two units.
The first of two units to compare.
The second of two units to compare.
Parameter val1 or val2, whichever is larger.
Returns the smaller of two units.
The first of two units to compare.
The second of two units to compare.
Parameter val1 or val2, whichever is smaller.
Returns a human-readable representation of this
.
A human-readable representation of this
.
Returns a human-readable representation of this
.
A specifying the
culture to use.
A human-readable representation of this
.
Gets or sets a
representing the default units of measure for a
.
A value
that defines the default units of measure for a Report.
Gets a double value representing the dpi of the current graphics
context.
A double value representing the dpi of the current graphics
context.
Specifies whether this
structure is uninitialized.
This property returns true if this unit is uninitialized;
otherwise, false.
Gets the type of the Unit.
A specifying the
type of this Unit.
Gets the magnitude of this Unit.
A float value indicating the magnitude of the Unit.
This property makes sense only in combination with the
property.
Gets the magnitude of this Unit in pixels.
An int value specifying the unit's magnitude in pixels.
Gets or sets the magnitude of this Unit in pixels.
A float value specifying the unit's magnitude in pixels.
Returns a magnitude in pixels based on the specified value
and type.
A double value specifying the magnitude.
A specifying the
unit type.
A double value representing the magnitude in pixels.
Returns a magnitude in units based on the specified pixels
and type.
A double value specifying the magnitude in pixels.
A specifying the
unit type to convert to.
A double value representing the magnitude in the specified
units.
Represents the type of a .
1 inch = 6 picas = 72 points.
1 centimeter = 10 millimeters.
Pixels convert to and from other units based on the dpi of the current
graphics context.
Represents pixels. String equivalent used in Unit's
constructor should be "px".
Represents points. String equivalent used in Unit's
constructor should be "pt".
Represents picas. String equivalent used in Unit's
constructor should be "pc".
Represents inches. String equivalent used in Unit's
constructor should be "in".
Represents millimeters. String equivalent used in Unit's
constructor should be "mm".
Represents centimeters. String equivalent used in Unit's
constructor should be "cm".
Specifies the vertical alignment of an object or text in an report item.
Specifies that the object is aligned to the top.
Specifies that the object is aligned to the middle.
Specifies that the object is aligned to the bottom.
Represents a collection of watermarks on a printable page.
Defines the orientation of the watermark text on the printable page.
The watermark text is oriented horizontally on the printable page.
The watermark text is oriented vertically on the printable page.
The watermark text is oriented diagonally on the printable page.
Defines the position of the watermark relative to the other items on the printable page.
Specifies that the watermark is behind the other items on the printable page.
Specifies that the watermark is in front of the other items on the printable page.
Defines the sizing mode of the watermark image on the printable page.
The watermark image is centered on the printable area of the page.
The watermark image is stretched to fill the printable area of the
page without preserving its original proportions.
The watermark image is scaled to fill the printable area of the
page while preserving its original proportions.
Represents an axis in a .
Occurs when the report item is disposed.
Gets or sets the scale for the current axis.
The scale can be one of the following types: , , , , .
Gets the default style for the current axis, tick marks and labels.
Gets the default style for the title of the current axis.
Gets the style of the grid lines that correspond to the major axis steps.
Gets the style of the grid lines that correspond to the minor axis steps.
Gets or sets a value that indicates how to display the tick marks that correspond to the major axis steps.
Gets or sets a value that indicates how to display the tick marks that correspond to the minor axis steps.
Gets or sets a value that indicates how to format the labels.
Gets or sets the position of the axis labels according to the complementary axis' min/max values.
Gets or sets the angle in degrees at which the axis labels are rotated.
Gets or sets the title of the axis.
A started with "=" is interpreted as
an expression to calculate the real data,
otherwise - literal string.
Supports embedded expressions also.
Gets or sets the placement of the axis title.
Specifies the graph item's left position.
Specifies the graph item's left position.
Specifies the graph item's left position.
Gets or sets a value indicating whether to display multidimensional category scale labels on one or more levels.
Specifies how axis labels are placed on the axis.
No axis labels.
Follows the axis.
Labels at min value of the related axis.
Labels at max value of the related axis.
Specifies how tick marks are drawn on the axis.
No tick marks.
Display the tick marks inside the graph area.
Display the tick marks outside the graph area.
Display the tick marks so that it crosses the axis line, displaying both inside and outside the graph area.
Specifies how the axis title is placed on the axis.
No axis title.
Uses the default value for the axis title placement.
The axis title is placed at min value of the axis.
The axis title is placed at max value of the axis.
The axis title is centered according to the axis.
The orientation of the angular axis labels.
Labels are arranged in circle.
The angle of the data-point is the base angle for the label.
Additionally the LabelAngle property of the axis is taken into account.
The overall angle of the label is [data-point angle] + [LabelAngle]
Labels are arranged at a fixed angle.
All labels will have the same angle equal to the value of the LabelAngle property of the axis.
Represents a two-dimensional Cartesian (rectangular) coordinate system.
Represents a coordinate system in a item.
In the item
Represents an object of the report/data hierarchy. Used for the expand/collabse/cache data logic
that needs unique names/path. All items/objects that form the data hierarchy should implement this
interface.
Gets or sets the name of the coordinate system.
The Name should uniquely identify the coordinate system in the context
of the item it belongs to.
Gets the default style for the axes, tick marks and labels.
Gets or sets the X-axis (horizontal) of the CartesianCoordinateSystem.
Gets or sets the Y-axis (vertical) of the CartesianCoordinateSystem.
Represents a collection of objects.
Represents a two-dimentional polar coordinate system. Points in the polar coordinate
system are defined with radial and angular coordinates.
Gets or sets the radial axis of the PolarCoordinateSystem.
Gets or sets the angular axis of the PolarCoordinateSystem.
Gets or sets the orientation of the angular axis labels.
Gets or sets the angle in degrees measured clockwise from the radial axis to the starting point of the angular axis.
Gets or sets the angle in degrees measured clockwise from the startAngle parameter to ending point of the angular axis.
Gets or sets a value indicating the ratio between the inner and the outer radius of the PolarCoordinateSystem.
Use InnerRadiusRatio greater than 0 to create 'doughnut' like graphs.
Specifies how tick marks are positioned in relation to the data points.
Specifies data points to be positioned between tick marks.
Specifies data points to be positioned on tick marks.
Specifies a category scale for a .
Indicates whether to arrange values in reverse order.
Zero value is where the other axis crosses the current axis;
Determines the number of space slots that will be left around the DataPoints per category slot,
measured relatively to the DataPoint slot's width:
Empty Space = SpacingSlotCount * DataPoint_SlotWidth
Specifies how the tick marks are positioned in relation to data points.
Applied when GraphScaleCrossAxisPosition is set to GraphAxisZeroValueMode.Specific.
Zero value is where the other axis crosses the current axis.
Represents the position on an axis with where the axes cross.
Represents the position on an axis where the axes cross.
Gets or sets the value that indicates the position where the axes cross.
Gets or sets the value where the other axis crosses the current axis.
The Value property is applied only if is set to GraphAxisZeroValueMode.Specific.
Represents a collection of objects.
A DateTimeAxis displays dates in chronological order at specific intervals, or base units,
even if the dates from the data source are not in order or in the same base units.
Gets or sets the base unit for the current DateTimeScale. The base unit
defines the interval between the points on the axis. By default the base units
are according to the smallest difference between any two dates in the data.
Gets or sets the unit for the interval/step between the minor ticks/grid lines.
In conjunction with the property defines the interval between
the minor ticks and minor grid lines, ex.: 1 day, 3 months, 1 year.
Gets or sets the step/interval for the minor ticks/grid lines.
In conjunction with the property defines the interval between
the minor ticks and minor grid lines, ex.: 1 day, 3 months, 1 year.
Gets or sets the unit for the interval/step between the major ticks/grid lines.
In conjunction with the property defines the interval between
the major ticks and major grid lines, ex.: 1 day, 3 months, 1 year.
Gets or sets the step/interval between the major ticks/grid lines.
In conjunction with the property defines the interval between
the major ticks and major grid lines, ex.: 1 day, 3 months, 1 year.
Gets or sets the minimum value for the current axis.
Gets or sets the maximum value for the current axis.
Applied when GraphScaleCrossAxisPosition is set to GraphAxisZeroValueMode.Specific.
Zero value is where the other axis crosses the current axis.
Represents the position on an axis with where the axes cross.
Gets or sets the value where the other axis crosses the current axis.
The Value property is applied only if is set to GraphAxisZeroValueMode.Specific.
Represents a collection of objects.
Determines the unit for the interval/step between minor/major ticks/grid lines.
Specifies a minute unit for the datetime interval.
Specifies an hour unit for the datetime interval.
Specifies a day unit for the datetime interval.
Specifies a month unit for the datetime interval.
Specifies a year unit for the datetime interval.
Determines the position at which axes cross each other.
Uses the default value at which the other axis crosses this axis.
Specifies that the other axis crosses this axis at its minimum value.
Specifies that the other axes crosses this axis at its maximum value.
Calculates the zero value at which the other axis crosses this axis.
The LogarithmicScale is similar to the , except there's a logarithmic transform that is
applied to the input domain value before the output range value is computed. The mapping
to the output range value y can be expressed as a function of the input domain
value x: y = m log(x) + b. The LogarithmicScale does not support zero or negative values.
The base class for all numerical scales.
Axis' minimum value. Set to float.NaN to automatically calculate the value based on the data.
Graph axis range - maximum value. Set to float.NaN to automatically calculate the value based on the data.
Gets or sets the base value of the logarithm.
Axis' minimum value. Set to float.NaN to automatically calculate the value based on the data.
Due to the nature of the logarithmic transformation applied to the scale
the Minimum property accepts only positive numbers and
throws an error for zero or negative values.
A positive number that defines the minimum value for the scale.
A value indicates that the scale will automatically
calculate its minimum value based on the data.
The default value is .
Graph axis range - maximum value. Set to float.NaN to automatically calculate the value based on the data.
Due to the nature of the logarithmic transformation applied to the scale the Maximum property accepts only positive numbers and
throws an error for zero or negative values.
A positive number that indicates the maximum value for the scale.
A positive number that defines the maximum value for the scale.
A value indicates that the scale will automatically
calculate its maximum value based on the data.
The default value is .
[MergableProperty(true)]
A collection of items that defines
the where the other axes cross the current one.
Gets or sets the step/interval for the major ticks/grid lines.
Gets or sets the step/interval for the minor ticks/grid lines.
Applied when GraphScaleCrossAxisPosition is set to GraphAxisZeroValueMode.Specific.
Zero value is where the other axis crosses the current axis.
Represents the position on an axis with where the axes cross.
Gets or sets the value where the other axis crosses the current axis.
The Value property is applied only if is set to GraphAxisZeroValueMode.Specific.
Due to the nature of the logarithmic transformation applied to the scale
the Value property accepts only positive numbers and
throws an error for zero or negative values.
A positive number that defines the exact value where the other axis crosses the current one.
The default value is 1.0.
Represents a collection of objects.
Represents a numerical scale with continuous input domain.
Gets or sets the step/interval for the major ticks/grid lines.
Gets or sets the step/interval for the minor ticks/grid lines.
Applied when GraphScaleCrossAxisPosition is set to GraphAxisZeroValueMode.Specific.
Zero value is where the other axis crosses the current axis.
A collection of items that defines
the where the other axes cross the current one.
Represents the position on an axis with where the axes cross.
Gets or sets the value where the other axis crosses the current axis.
The Value property is applied only if is set to GraphAxisZeroValueMode.Specific.
Represents a collection of objects.
Represents an area chart displays a series as a set of points connected by a line, with all the area filled in below the line
Represents a series of data points in a two-dimensional coordinate system.
Represents a series of data points with labels in the report item.
Gets or sets the axis/direction that the is applied to.
This property is applicable if the ArrangeMode is set to Stacked or Stacked100; otherwise it is ignored.
Use the ArrangeByAxis property to specify how the series will be arranged (stacked) at runtime.
By default the Graph item always stacks the series by the axis with the Numeric scale
(including LogarithmicScale and ExponentialScale).
If a series is to be projected on a coordinate system with a combination of
NumericScale/CategoryScale or NumericScale/DateTimeScale, and the series has an
ArrangeMode set to Stacked or Stacked100, the series will always be stacked
by the value projected on the NumericScale, no matter if this is X/Y/Angular or Radial axis.
In the case a series is to be projected on a coordinate system where both axes
are NumercScales you can choose how you want to stack the series’ values.
If no axis is specified, the default is the X axis (in CartesianCoordinateSytem)
or the Angular axis (in the case of PolarCooordinateSystem).
The coordinate system to project the data points (category/value) onto.
The coordinate system can be a or a .
Data point label.
A started with "=" is interpreted as
an expression to calculate the real data,
otherwise - literal string.
Supports embedded expressions also.
Data point label format.
Gets the style for the labels of the data points.
Gets the to applied on the data points' labels.
Reserved for future use
Data point tooltip
A started with "=" is interpreted as
an expression to calculate the real data,
otherwise - literal string.
Supports embedded expressions also.
Reserved for future use
Data point tooltip format
Gets the to applied on the data points.
Gets the default style of a data point.
Gets or sets an expression or a text which is displayed in the legend.
A started with "=" is interpreted as
an expression to calculate the real data,
otherwise - literal string.
Supports embedded expressions also.
Gets or sets the number format for the legend value.
Gets or sets the name of the from the
hierarchy associated with this series.
Gets or sets the name of the from the
hierarchy associated with this series.
Gets or sets the color palette used for graph series.
A implementation
representing color palette used for graph series.
Gets or sets an expression that defines the X coordinate for the data points when in a
; For a gets or sets
the the Angular coordinate;
Gets or sets an expression that defines the Y coordinate for the data points when in a
; For a gets or sets
the the Radial coordinate;
Gets or sets a value indicating how to arrange the series at runtime.
Gets the style applied to the area defined by the the data points of this series.
Gets or sets a value indicating how to connect the data points: with a smooth or
straight lines.
When the SmoothLine is enabled the data points are connected with Bezier curves.
Gets or sets the type of the markers for the data points.
Gets or sets the size of the markers for the data points.
Gets or sets an expression that defines the X0 coordinate for the data points when in a
; For gets or sets
the the angular coordinate;
If omitted, the BarSeries' data points start from the corresponding axis.
Gets or sets an expression that defines the Y0 coordinate for the data points when in a
; For gets or sets
the the radial coordinate;
If omitted, the BarSeries' data points start from the corresponding axis.
Specifies how to align the labels for the data points of the .
Labels outside the end of each data point.
Labels inside the end of each data point.
Labels in the middle of each data point.
Labels inside the base of each data point.
Represents a series of data points with rectangular (Bar) shape when projected on a .
For the the items of the BarSeries have a wedge shape like in a
Pie or Doughnut charts.
Creates an instance of the class.
Specifies the data point label alignment.
Gets or sets an expression that defines the X0 coordinate for the data points when in a
; For gets or sets
the the angular coordinate;
If omitted, the BarSeries' data points start from the corresponding axis.
Gets or sets an expression that defines the Y0 coordinate for the data points when in a
; For gets or sets
the the radial coordinate;
If omitted, the BarSeries' data points start from the corresponding axis.
Determines the data point markers.
Uses the default marker type.
Uses a square shape for the data point marker.
Uses a diamond shape for the data point marker.
Uses a circle shape for the data point marker.
Uses a triangle shape for the data point marker.
Uses an X shape for the data point marker.
Uses a '+' shape for the data point marker.
Uses a '-' shape for the data point marker.
Specifies how the the graph series are arranged according to each other.
Specifies that the series are overlapped.
Specifies that the graph series are clustered. This value is applicable to Bar/Column charts only.
Specifies that the graph series are stacked.
Specifies that the graph series are stacked so that the data points from different series show a relative to each other value.
Represents a collection of objects.
Specifies how to align the labels for the data points of the scatter series: .
Labels on the left of each data point.
Labels on the right of each data point.
Labels above each data point.
Labels below each data point.
Labels in the middle of each data point.
Save as
Save as
Represents a in which the data points are connected with a line.
Creates an instance of the .
Gets or sets an expression that defines the size of the markers. Use this property to
create a Bubble like charts.
Gets or sets a value that defines the minimum size of the markers. Use this property to
create a Bubble like charts.
The minimum size of the markers/bubbles.
Set to for the value to be defined at run time according to the data.
The default value is .
Gets or sets a value that defines the maximum size of the markers. Use this property to
create a Bubble like charts.
The maximum size of the markers/bubbles.
Set to for the value to be defined at run time according to the data.
The default value is .
Gets or sets a value indicating how to connect the data points: with a smooth or
straight lines.
When the SmoothLine is enabled the data points are connected with Bezier curves.
Gets the style applied to the line that connects the data points of this series.
Gets or sets the shape of the marker.
Gets or sets the size of the markers if no is specified;
Gets or sets the size of the markers for the minimum value of the property.
Use the MarkerMinSize and properties in conjunction with the property
to create a Bubble chart;
Gets or sets the size for the maximum value of the property.
Use the MarkerMinSize and properties in conjunction with the property
to create a Bubble chart;
Gets or sets a value indicating how the labels of the data points to be aligned.
Represents an with both start (X0, Y0) and end (Y, Y) values.
Represents a with both start (X0, Y0) and end (Y, Y) values.
Use the Graph item to add charts to a report.
Defines the base class for all report items that can be placed in a
. Items of this type
have a location and a size.
Defines the base class for visual report items used for creating
reports.
Represents a report object which may be used as target of a .
Gets the name of the report object used as toggle visibility target.
The name of the report object.
The Name of the toggle visibility target should be unique in the report scope so
that triggering the toggle visibility action does not interfere with other report objects.
Gets or sets the color.
Gets or sets the bold.
Gets or sets the italic.
Gets or sets the name.
Gets or sets the size.
The size.
Gets or sets the strikeout.
Gets or sets the underline.
Gets or sets the background color.
Gets or sets the text style with StyleBuilder.
Returns a that represents the current
.
A String that contains the Name and the Type's
FullName of the current
.
Retrieves a value indicating whether the specified report item is
a child of the report item.
true if the specified report item is a child of the report
item; otherwise, false.
The to evaluate.
Raises the
event.
Raises the
event.
Raises the
event.
The being added.
Raises the
event.
The being removed.
Indicates whether this item can add the specified item as a
child.
The item to check.
true if the specified item can be a
added to this item, otherwise false.
The CanAdd method checks two conditions
Indicates whether an object of the specified type can be a
direct child of this item.
The type to check.
true if an object of the specified type can
be a direct child of this item, otherwise false.
If an item cannot contain an object of a given type, then it cannot
parent it as well. If an item cannot parent an object of a given
type, this does not mean that it cannot contain it. For example, a
Report cannot directly parent a TextBox, but it can contain a
TextBox.
Indicates whether this item can contain an object of the specified
type.
The type to check.
true if this item can contain an object of the
specified type, otherwise false.
Indicates whether this can be an ancestor of the specified item.
THIS OBJECT CAN BE AN ANCESTOR OF THE SPECIFIED ITEM WHEN IT CAN
CONTAIN THE TYPE OF THE ITEM AND ALL OF ITS DESCENDANTS.
The
to check.
true if this can be an ancestor of the specified
item, otherwise false.
Invalid ancestor-descendant relationships may occur even if the
direct parent-child relation (as indicated by the CanParent method)
is OK, but the item hierarchy as a whole is not OK (as indicated by
the CanContain method).
For example, a PageSection can have a Panel as a direct child and a
Panel can have a SubReport as a direct child (as indicated by the
CanParent method), but if we add a Panel with a SubReport in it to
a PageSection we will break the rule that PageSections cannot be
ancestors of SubReports (CanContain method).
Applies the specified
s to this item.
The s to apply to
this instance.
A value indicating whether to apply the
style to the children of this item recursively.
Design time purposes only
Occurs when a new report item is added to the
.
Occurs when a report item is removed from the
.
Occurs when the report item binds to a data source.
Occurs after the report item binds to a data source.
Occurs when the report item is disposed.
Gets or sets the name of the report item.
The name of the report item.
The Name property can be used at run time to evaluate the
object by name rather than type and programmatic name.
Gets or sets a value indicating whether the report item is
displayed.
true if the report item is displayed; otherwise,
false. The default is true.
Gets or sets the name of the report item's global style.
A string value specifying the style name.
Global styles are defined through the
's
property.
Gets a object
specifying the appearance of the report item.
A object specifying
the items's style.
Gets the collection of report items contained within the report
item.
An
representing the collection of items contained within the item.
Gets or sets the parent container of the report item.
A that represents
the parent item of the report item.
Setting the Parent property value to a null reference
(Nothing in Visual Basic) removes the item from the
of
its current parent item.
Gets the report this item belongs to.
A object which the item
belongs to.
Gets the collection of the conditional formatting rules, associated with this item.
Gets or sets a bookmark label to be displayed for this report item.
A string / expression value specifying the bookmark label.
Gets or sets a bookmark id for this item.
A started with "=" is interpreted as
an expression to calculate the real data,
otherwise - literal string.
Supports embedded expressions also.
When processed should evaluate to an unique value
for each processing instance of the item.
Gets or sets a text to be displayed for this item in the document map.
When defined the document map displays nodes
that navigate to the instances of the item.
A started with "=" is interpreted as
an expression to calculate the real data,
otherwise - literal string.
Supports embedded expressions also.
Gets or sets an interactive action associated with this report item.
Gets the collection of binding rules contained within the report item.
An collection of instances
representing the list of property bindings defined within the item.
Represents a collection of
objects.
The ,
,
and
methods enable you to add and remove individual items from the
collection. You can also use the
or methods
to add or remove all the items from the collection.
You can determine if a
is a member of the
collection by passing the item into the
method. To get the index value of the location of a
in the collection,
pass the item into the
method. The collection can be copied into an array by calling the
method.
Initializes a new instance of the
class.
A representing
the report item that owns the report item collection.
Adds an array of report item objects to the collection.
An array of
objects to add to the collection.
The ReportItemBase objects contained in the
items array are appended to the end of the collection.
You can use the AddRange method to quickly add a
group of ReportItemBase objects to the collection
instead of manually adding each ReportItemBase to the
collection using the
method.
To remove a ReportItemBase that you previously
added, use the
,
,
or
methods.
Removes the child report item with the specified key.
The name of the child report item to remove.
The
property of a
corresponds to the key for a ReportItemBase in the
.
Determines whether the ReportItemBase.ItemCollection
contains an item with the specified key.
The key to locate in the
.
true if the ReportItemBase.ItemCollection
contains an item with the specified key; otherwise,
false.
The
property of a
corresponds to the key for a ReportItemBase in the
.
Gets a value indicating whether the specified index exists in
the collection.
An index value to check.
true if the collection contains an item with the
specified index; otherwise false.
Retrieves the index of the first occurrence of the specified
item within the collection.
The name of the report item to search for.
The zero-based index of the first occurrence of the report item
with the specified name in the collection.
The key comparison is not case-sensitive. If the key
parameter is a null reference (Nothing in Visual Basic) or an
empty string, or an item with the specified key is not found,
IndexOfKey returns -1.
The
property of a
corresponds to the key for a ReportItemBase in the
.
Performs additional custom processes when validating a value.
The object to validate.
The object is not an instance of the
class or one of
its derived classes.
Overrides the
method.
The zero-based index at which to insert value.
The new value of the element at index.
Overrides the
method.
The zero-based index at which value can be found.
The value of the element to remove from index.
Searches for report items by their
property and builds an array of all the report items that
match.
The key to locate in the
.
true to search all child report items; otherwise,
false.
An array of type
containing the
matching report items.
The key parameter is null or empty.
Searches the collection for a report item of the specified
type.
The to search for.
The first in
the collection that matches the given
. If no item in the collection
matches the given the method returns
null.
Searches for report items by their Type and builds an array of
all the items that match.
The to search for.
An array of type
containing the
matching report items.
Searches for report items by their Type and builds an array of
all the items that match.
The to search for.
A value indicating whether to search
all children recursively.
An array of type
containing the
matching report items.
Retrieves the index of a report item within the item
collection.
The to search
for in the item collection.
A zero-based index value that represents the location of the
specified child report item within the item collection.
Retrieves the index of the specified child report item within
the item collection, and optionally raises an exception if the
specified report item is not within the item collection.
The to search
for in the item collection.
true to throw an exception if the ReportItemBase
specified in the child parameter is not an item in the
;
otherwise, false.
A zero-based index value that represents the location of the
specified child report item within the item collection;
otherwise -1 if the specified ReportItemBase is not
found in the
.
The child is not contained in the collection and the
throwException parameter is true.
Returns the with
the specified key in the collection.
The name of the report item to retrieve from the report item
collection.
The with the
specified key in the collection.
Gets the rectangle that represents the client area of the
report item.
A that
represents the client area of the report item.
The client area of a report is the bounds of the item, minus the
nonclient elements such as borders and padding.
Gets or sets the height and width of the report item.
The that represents
the height and width of the report item in Units.
Because the SizeU class is a value type (Structure in
Visual Basic, struct in Visual C#), it is returned by value,
meaning accessing the property returns a copy of the size of the
report item. So, adjusting the
or
properties of
the SizeU returned from this property will not affect the
or
of the report
item. To adjust the Width or Height of the report
item, you must set the item's Width or Height
property, or set the Size property with a new SizeU.
Gets or sets the coordinates of the upper-left corner of the report
item relative to the upper-left corner of its container.
The that represents
the upper-left corner of the report item relative to the upper-left
corner of its container.
Because the PointU class is a value type (Structure
in Visual Basic, struct in Visual C#), it is returned by
value, meaning accessing the property returns a copy of the
upper-left point of the report item. So, adjusting the
or
properties of the
PointU returned from this property will not affect the
,
,
, or
property values
of the report item. To adjust these properties set each property
value individually, or set the Location property with a new
PointU.
Gets or sets the edges of the container to which a report is bound
and determines how a report items is resized with its parent.
A bitwise combination of the
values. The default
is .
Use the Anchoring property to define how a report is automatically
resized as its parent item is resized. Anchoring a report to its
parent ensures that the anchored edges remain in the same position
relative to the edges of the parent when the parent control is
resized.
You can anchor a report item to one or more edges of its
container. For example, if you have a DetailSection with a
TextBox whose Anchoring property value is set to
Top and Bottom, the TextBox is stretched to
maintain the anchored distance to the top and bottom edges of the
DetailSection as the Height of the
DetailSection is increased.
Note:The Anchoring and
properties are
mutually exclusive. Only one can be set at a time, and the last one
set takes precedence.
Gets or sets which report item borders are docked to its parent
and determines how a report item is resized with its parent.
One of the values.
The default is .
Use the Docking property to define how a report is
automatically resized as its parent is resized. For example,
setting Docking to
causes the report
item to align itself with the bottom edges of its parent and to
resize as the parent is resized.
A report item can be docked to one edge of its parent container or
can be docked to all edges and fill the parent container.
Note:The
and Docking properties are mutually exclusive. Only one can be
set at a time, and the last one set takes precedence.
Gets or sets the size and location of the report item including its
nonclient elements, in Units, relative to the parent report item.
A relative to
the parent report item that represents the size and location of the
report item including its nonclient elements.
The bounds of the report item include the nonclient elements such
as borders and padding.
Gets or sets the distance, in Units, between the left edge of the
report item and the left edge of its container's client area.
An representing the
distance between the left edge of the report item and the left edge
of its container's client area.
The Left property value is equivalent to the
property of the
property value
of the report item.
Changes made to the
and Left
property values cause the
property value of
the report item to change.
Gets the distance, in Units, between the right edge of the
report item and the left edge of its container's client area.
An representing the
distance between the right edge of the report item and the left edge
of its container's client area.
The value of the Right property is equal to the sum of the
property value and
the property
value.
Gets or sets the distance, in Units, between the top edge of the
report item and the top edge of its container's client area.
An representing the
distance between the top edge of the report item and the top edge
of its container's client area.
The Top property value is equivalent to the
property of the
property value
of the report item.
Changes made to the
and Top
property values cause the
property value of
the report item to change.
Gets the distance, in Units, between the bottom edge of the
report item and the top edge of its container's client area.
An representing the
distance between the bottom edge of the report item and the top
edge of its container's client area.
The value of the Bottom property is equal to the sum of the
property value and
the property
value.
Gets or sets the width of the report item.
The width of the report item in Units.
Changes made to the Width and
property values
cause the property
value of the report item to change.
Gets or sets the height of the report item.
The height of the report item in Units.
Changes made to the Height and
property values
cause the property
value of the report item to change.
Gets the default size of the report item.
The default of the
report item.
The DefaultSize property represents the SizeU of the
report item when it is initially created. You can adjust the size
of the report item by setting its
property value.
Defines an interface for data-bound items.
Occurs when the processing of the data item processing instance (i.e., instance) begins
and this instance has no property set.
The event is hooked on the definition instance,
but the sender object in the event handler is the processing instance.
The processing instance of the data item inherits its DataSource from the definition instance,
but if neither has DataSource set, this event is raised.
The following example demonstrates how to implement a NeedDataSource event handler:
- A
- A
- A
- A
- Any component that implements the
interface
- Any component that implements the
interface
- Any component that implements the
interface
If the DataSource reference contains more than one table,
you must set the DataMember property a string that specifies
the table to bind to. For example, if the DataSource is a
DataSet or DataViewManager that contains three tables
named Customers, Orders, and
OrderDetails, you must specify the table to bind to.
Setting the DataSource to an object that does not implement
the IListSource, IEnumerable, or IDataAdapter
will cause an exception.
Gets a
that defines the filter expression(s) for the
A
that contains the
objects for
the Table
Filter expressions limit the data that is displayed to the user
after the data is retrieved from the data source.
Gets or sets the current data item no data message.
A that starts with "=" is interpreted as expression
to calculate the no data message;
otherwise - literal string.
Supports embedded expressions also.
Gets a object
specifying the appearance of the no data message.
A object specifying
the items's style.
Gets a
that defines the sort column(s), and their type and order for the
A
that contains the
objects for the
Table
Sort expressions sort the data that is displayed to the user
after the data is retrieved from the data source.
Gets the collection of s.
Gets the hierarchy of s that define the series for the current Graph.
Gets the hierarchy of s that define the categories for the current Graph.
Gets the collection of defined for the current Graph.
Gets or sets the Legend for the current Graph
Gets the collection of defined for the current Graph.
Gets the style of the plot area.
The plot area of a Graph is the area where all series including the data points
and labels are rendered. The plot area also contains all grid lines if defined.
Gets or sets the culture information associated with the report.
A representing the
culture supported by the .
Gets or sets the color palette used for graph series.
A implementation
representing color palette used for graph series.
Represents a group in a item.
Represents an interface for grouping, filtering and sorting data.
Gets or sets the name of the group.
The name of the group.
The Name property can be used at run time to set the scope of aggregate functions.
Gets a
object that holds all
objects for
the group.
A
value containing the group expressions of the group.
Groups are defined by adding one or more group expressions to the
collection. Grouping can be done by one or more data fields. Each
data field is represented by a group expression in the collection.
Gets a
that defines the sort column(s), and their type and order for the
Group
A
that contains the
objects for the
Group
Sort expressions sort the data that is displayed in the
Group
Gets a
that defines the filter expression(s) for the
A
that contains the
objects for
the Group
Filter expressions limit the data that is displayed in the
Group
Defines hierarchy of groups
Gets or sets the label for the categories in .
Applicable only to groups from the hierarchy.
A started with "=" is interpreted as
an expression to calculate the real data,
otherwise - literal string.
Supports embedded expressions also.
Gets or sets an interactive action associated with this graph group.
Gets or sets a value indicating whether the graph group is displayed.
true if the table group is displayed; otherwise,
false. The default is true.
Represents a collection of s.
Specifies the graph item's bounds.
Specifies the graph item's location.
Specifies the graph item's size.
Specifies the graph item's top position.
Specifies the graph item's left position.
Specifies the graph item's width.
Specifies the graph item's height.
Specifies the graph item's style.
Determines whether the graph item is inside or outside the plot area.
Specifies the graph item's position.
Specifies top left position.
Specifies top center position.
Specifies top right position.
Specifies left top position.
Specifies left center position.
Specifies left bottom position.
Specifies right top position.
Specifies right center position.
Specifies right bottom position.
Specifies bottom left position.
Specifies bottom center position.
Specifies bottom right position.
Specifies absolute position.
Specifies center position.
Specifies the legend for the graph.
Specifies the text for the legend's title.
A started with "=" is interpreted as
an expression to calculate the real data,
otherwise - literal string.
Supports embedded expressions also.
Specifies the for the legend's title.
Specifies the position of the .
Represents a title for the graph.
Specifies the text for the title.
A started with "=" is interpreted as
an expression to calculate the real data,
otherwise - literal string.
Supports embedded expressions also.
Specifies the position of .
Specifies how a anchors to the edges of its container.
The is not anchored to any edge of its container.
The is anchored to the top edge of its container.
The is anchored to the bottom edge of its container.
The is anchored to the left edge of its container.
The is anchored to the right edge of its container.
Represents a barcode report item.
Gets or sets the current value to be encoded in the barcode.
A that starts with the symbol "=" is
interpreted as an expression to calculate the value of the current
barcode, otherwise the value is interpreted as a literal string.
Gets or sets a
representing the width of of the narrowest bar of the barcode.
A value representing
the width of the narrowest bar of the barcode.
Gets or sets a value indicating the angle of rotation of the bar
code inside the report item, specified in degrees.
A double value indicating the angle of rotation in degrees.
Gets or sets a value indicating whether to stretch the barcode to
fill the entire area of the report item item or not.
true if the barcode should be stretched, otherwise false.
Gets or sets a value indicating whether the barcode should contain a
checksum for validation purposes during the scanning process or not.
true if the barcode should contain a checksum for validation
purposes during the scanning process, otherwise false.
Gets or sets a value indicating whether the barcode should display a
human-readable text representation of the encoded value.
true if the barcode should display text, otherwise false.
Gets or sets the horizontal alignment of the barcode in the report item.
One of the values.
The default value is HorizontalAlign.Center.
Gets or sets a value indicating the current symbology used to
encode the Value property as series of bars and spaces.
A enumerated value
indicating the symbology associated with the current barcode.
Represents the simple binding between the target property of a report item
and an expression.
Gets or sets the property path determining the item's bound
simple/nested property.
Gets or sets the expression used to evaluate the value of the specified
in target property.
Represents a collection of s.
Used by the design time serialization
Represents a chart report item
Common chart components definitions
MapMath method
path
path
Control clone
Chart object
Path to the Temp folder
Resets current chart skin to the default one.
Specifies the custom palettes for chart.
Collection of titles for chart
Chart legend
Link to visualization and design properties
Gets or sets the name of the chart's skin.
Chart plot area
Default chart type
Defines a data source column name for grouping data
Gets or sets the chart's series collection object.
Specifies the series palette
Specifies the image format in which the image is streamed.
Specifies the orientation of the chart series on the plot area.
Specifies the resolution of the chart image when rendered as Bitmap.
Specifies AutoLayout mode to all items on the chart control.
Specifies AutoTextWrap mode for all wrappable text blocks of the chart control.
Toggles the use of the IntelligentLabels feature.
Represents a check box report item.
Represents a Text Item - a base class for report items like TextBox and CheckBox.
Gets or sets the numeric format.
Gets or sets the angle of rotation of the text in degrees.
A double value indicating the angle of rotation in degrees.
Gets or sets the character(s) that specify how text is formatted.
The character or characters that specify how text is formatted.
For more information see the
method.
Gets or sets a value indicating whether the Text Item can grow
vertically.
true if the Text Item can grow vertically; otherwise
false.
Gets or sets a value indicating whether the Text Item can shrink
vertically.
true if the Text Item can shrink vertically; otherwise
false.
Gets or sets a value indicating whether this is a multiline Text Item.
true if the Text Item supports multiple lines; otherwise
false.
Gets or sets a value indicating whether a Text Item
automatically wraps words to the beginning of the next line when
necessary.
true if the Text Item wraps words; otherwise
false.
Gets or sets the culture information associated with the Text Item.
A representing the
culture supported by the .
Gets or sets the current text (aka label) in the check box.
A started with "=" is interpreted as
an expression to calculate the real data,
otherwise - literal string.
Supports embedded expressions also.
Gets or sets the value of the check box.
A started with "=" is interpreted as
an expression to calculate the real data,
otherwise - literal string.
Gets or sets the alignment of the check mark on a CheckBox.
One of the values.
The default is .
Gets or sets the value template corresponding to an Unchecked CheckBox
A started with "=" is interpreted as
an expression to calculate the real data,
otherwise - literal string.
Gets or sets the value template corresponding to an Selected CheckBox
A started with "=" is interpreted as
an expression to calculate the real data,
otherwise - literal string.
Gets or sets the value template corresponding to an Indeterminate CheckBox
A started with "=" is interpreted as
an expression to calculate the real data,
otherwise - literal string.
Gets or sets the image corresponding to an Unchecked CheckBox
A started with "=" is interpreted as
an expression,
Gets or sets the image corresponding to an Selected CheckBox
A started with "=" is interpreted as
an expression,
Gets or sets the image corresponding to an Indeterminate CheckBox
A started with "=" is interpreted as
an expression,
Represents the main section of a
. It is printed once for
every record in the data source of the report.
The Detail section appears below
and
sections and
above and
sections.
Base abstract class for all report sections contained in the report
body. Inherited by
,
,
,
,
Defines the base class for report sections.
Initializes a new instance of the
class.
Gets or sets the height of the current section.
The height of the current section in Units.
Gets or sets the page braking rule for this
.
A object specifying the
page braking rule for this
.
Gets or sets a value indicating whether the rendering engine should
try to keep the
on one page if possible.
A boolean value indicating whether the rendering engine
should try to keep the
on one page if possible.
Gets or sets a value that specifies how many columns are present
in the of the report.
An integer value specifying the number of columns.
The value should be equal to or greater than 1. The default is 1.
Column widths are calculated based on the following rule:
DetailWidth = ColumnWidth * ColumnCount +
ColumSpacing * (ColumnCount - 1)
Multi-column reports are primarily used for printing labels.
Gets or sets a value indicating the space in Units between two
adjacent columns.
A value specifying the
space between two adjacent columns. The value should be a
non-negative Unit. The default is
This property should be used when there should be some blank space
left between adjacent columns.
Specifies how a docks to the edges of its container.
The is not docked to any edge of its container.
The is docked to the top edge of its container.
The is docked to the bottom edge of its container.
The is docked to the left edge of its container.
The is docked to the right edge of its container.
The is docked to all of the edges of its container.
Provides a data for the event of a .
A object is passed to the event handler, which allows you to
determine the current exception that has occurred during the report processing and to
indicate that the report operation should be canceled. To cancel the report operation,
set the property to True.
Gets the current exception.
If the Value starts with the equal (=) sign, it will be evaluated as an expression
otherwise - as string value. For ex. if the value is 7 it is interpreted as
the string "7"; To compare a numeric expression with the number 7, use the
expression syntax which begins with the equal sign: =7.
Represents a class that defines a report group.
The Group class represents a set of grouping criteria. It also
acts as a logical holder of the
and
of the group.
The Group objects of a report reside in the component tray.
Initializes a new instance of the
class with default settings.
Initializes a new instance of the
class with the specified
group header/footer creation option.
true to create a
and a
; otherwise,
false.
Set to FirstDetail to ensure that the group header and the first detail record are printed on the same page of output, or All to ensure that the entire group is printed on the same page of output. If there is not enough space on the current page, then rendering will skip to the top of the next page.
Gets a
representing the group's header section.
A value that
represents the group header section of the Group.
The Group header section is rendered before the detail
sections of the Group. Typically, this section will contain
report items that are bound to the data fields of the
Group's grouping expressions.
Gets a
representing the group's footer section.
A value that
represents the group footer section of the Group.
The Group footer section is rendered after the detail
sections of the Group.
Gets a
representing the group's owner report.
A value that
represents the owner report of the Group.
Gets or sets a bookmark id for this group.
A string / expression value specifying the bookmark id.
When processed should evaluate to an unique value
for each processing instance of the group.
A started with "=" is interpreted as
an expression to calculate the real data,
otherwise - literal string.
Supports embedded expressions also.
Gets or sets a text to be displayed for this group in the document map.
When defined the document map displays nodes
that navigate to the instances of the group.
A started with "=" is interpreted as
an expression to calculate the real data,
otherwise - literal string.
Supports embedded expressions also.
Gets or sets a value indicating whether the group is displayed.
true if the group is displayed; otherwise,
false. The default is true.
ExternalStyleSheetCollectionConverter
Represents a group footer section. Group footers are displayed at the
end of a group. Group headers and footers are unified by the
class.
Base abstract class for group sections.
and
inherit from this
class.
Gets the object associated
with this section.
A object that this section
belong to.
Indicates whether the section should be printed on every page
that the group occupies.
A boolean value indicating whether the section should be
printed on every page that the group occupies.
Initializes a new instance of the
class.
Represents a group header section. Group headers are displayed at the
beginning of a group. Group headers and footers are unified by the
class.
Initializes a new instance of the
class.
GroupKeepTogether applies to a group and has similar to the
meaning,
but for the whole group. It indicates whether the rendering engine
should try to render the whole group on a single page, the
group header plus the first detail on a single page, or leave
the group flow as it is. If GroupKeepTogether is set to
FirstDetail -- the group header and at least one detail in this
group should be on the same page; if set to All -- the whole
group should be on a single page. The following rule applies: the
rendering engine will try to render the group as specified, but if
there is not enough space on the current page, the group is moved to
the next page and it continues as long as it needs.
The rendering engine will leave the group flow as it is.
The rendering engine should try to keep the group header and at
least 1 detail on the same page.
The rendering engine should try to keep the whole group on
the same
page.
Represents a html text box report item.
Gets or sets the expression value.
A started with "=" is interpreted as
an expression to calculate the real data,
otherwise - literal string.
Supports embedded expressions also.
Gets or sets the current text in the text box.
A that starts with "=" is interpreted as expression
to calculate the value of the current TextBox;
otherwise - literal string.
Gets or sets a value indicating whether the rendering engine should
try to keep the on one page
if possible.
A boolean value indicating whether the rendering engine should
try to keep the on one page
if possible.
Gets or sets a value indicating whether the Text Item can grow
vertically.
true if the Text Item can grow vertically; otherwise
false.
Gets or sets a value indicating whether the Text Item can shrink
vertically.
true if the Text Item can shrink vertically; otherwise
false.
Gets or sets the culture information associated with the Text Item.
A representing the
culture supported by the .
Represents an interactive action associated with a report item.
Represents a report document.
Gets the reports contained in the document.
Gets or sets the name of the document.
Gets or sets the page setting for the document.
Gets the parameters for the document.
Represents a report parameter.
Gets or sets the name of the parameter. Used to access the parameter.
Parameter names must be unique in the context of a single report.
The name must be a valid identifier - may contain only digits (0-9), letters (a-z, A-Z),
and underscore sign (_). Must begin with a letter or underscore.
Gets or sets the data type of the parameter.
Determines the type of the values. Acceptable values for each type are listed in .
The default parameter type is .
Gets or sets the value of the parameter. Can be an Expression that
evaluates to an object, value of the allowed types,
or containing values of the allowed types.
Gets or sets a value indicating whether this parameter should be
merged with identical parameters from other reports when this report
is part of a .
Controls parameter merging in .
The default value of the Mergeable property is true.
Set the Mergeable property to false if you want to prevent a parameter
from being merged with its equivalent ones.
Gets or sets the text for the parameter's automatic UI displayed in the report viewer.
The Text property specifies the text for the parameter to be displayed
in the report viewer as prompt to the end user.
If value for the property is not provided the
of the parameter is used.
Determines whether automatic user interface (UI) prompting for values
to be generated for the parameter.
Specifies whether the parameter will have UI in the parameters area.
When at least one report parameter has the Visible property turned on,
a parameter area is shown as part of the report viewer.
If this property is set to false, the parameter must be populated
programmatically or at design time.
Determines if the parameter can hold more then one value.
If the value is set to true as a valid value of the parameter is accepted
an of values
of the specified of the parameter.
Parameters with MultiValue turned on are mainly used with the IN logical operator.
Determines if the parameter allows no value to be passed from it's
editor.
Only if this property is set to false null (
Nothing in VB) are considered as valid values of the
parameter.
Gets or sets a value that indicates whether an empty string is a valid value for the parameter.
Only for parameters of String.
Gets an object that defines a set of valid values the parameter can accept from.
The available values, or valid values, are a set of predefined values
which are acceptable as value of the parameter.
Each available value may have label that will be displayed if the parameter is visible.
Determines whether to trigger the report preview after changing the value for a parameter.
Applies only for visible parameters.
If this property is set to true, the report viewer will trigger
the report preview automatically when the parameter value is changed.
The parameter should be visible in order to auto preview the report.
Provides an interface for resolving resources.
Provides data for the
and
events.
Initializes a new instance of the
class with the
specified item that is added or removed.
A that is the item
being added or removed.
Gets the report item that is added/removed.
A that is the item
being added or removed.
Handles the events that occur when items are being added to or removed
from an items collection.
The item whose collection is being modified.
An object of the class
that contains the item that is being added or removed.
Represent an interactive action that navigates the report viewer
to a predefined bookmark in the same report.
Use this action to specify an interactive action on a report item
that navigates the report viewer to an item with defined BookmarkId
in the same report.
Gets or sets the target bookmark of the action.
Use this property to specify the value of the target bookmark.
This property accepts expressions.
Represent an interactive action that navigates the report viewer to another report.
Use this action to specify an interactive action on a report item that navigates the
report viewer to another report (drillthrough). Report parameter values may be passed
to the target report.
Gets or sets the type name of the target report.
Use this property to specify the type name of the target report of the action.
Must be the assembly qualified name of the of the report.
The target type should implement the
interface
and should have default (parameterless) constructor.
The default constructor is used from the reporting engine to create a report
instance when the action is triggered.
This property accepts expressions.
Determines the report parameters that are passed to the target report when the
action is triggered.
Specifies the for the action.
Represent an interactive action that opens an Url.
Use this action to specify an interactive action on a report item
that opens an Url.
Creates a new instance of NavigateToUrlAction class
Represents NavigateToUrlAction target types.
Open in new window
Open in the same window
Compares two IEnumerable-s in an ordered fashion (easier)
Allows a property of type Object to be edited like a string property in the Properties window
Specifies where to make a page break, with respect to a
.
No page break will occur.
A page break will occur before the
A page break will occur after the
A page break will occur before and after the
Provides data for the
and
events.
Initializes a new instance of the
class with the
specified page number and page count.
The number of the page.
The total number of pages.
Gets the number of the page that the event is beign raised for.
A int value specifying the number of the page that the event
is beign raised for.
Gets the total number of pages of the report.
A int value specifying the total number of pages of the
report.
Handles the events that occur when a page rendering begins or ends.
The report that owns the page.
An object of the class
that contains data for the page being rendered.
Represents a page footer section. Page footers are displayed at the
end of a page.
Note:Page header/footer section of nested reports are ignored by the reporting
engine (only the master report respects page sections). In order to have
a header/footer that repeats on every page, you may consider using an unbound group
(a group without any grouping criteria specified) and set its
GroupHeader/FooterSection.PrintOnEveryPage = True
Base abstract class for group sections.
and
inherit from this
class.
Gets or sets a value indicating whether the section should print
on the first page of the report.
A boolean value indicating whether the section should print
on the first page of the report.
Gets or sets a value indicating whether the section should print
on the last page of the report.
A boolean value indicating whether the section should print
on the last page of the report.
Represents a page header section. Page headers are displayed at the
beginning of a page.
Note:Page header/footer section of nested reports are ignored by the reporting
engine (only the master report respects page sections). In order to have
a header/footer that repeats on every page, you may consider using an unbound group
(a group without any grouping criteria specified) and set its
GroupHeader/FooterSection.PrintOnEveryPage = True
Specifies the page numbering style of a report.
Has meaning and effect only when the report is part of a report book.
Page numbering starts from 1.
Resets page numbering while page count aggregation continues.
Resets both page numbering and page count.
Page numbering and page count aggregations continue.
Provides a grouping mechanism for organizing report items.
Gets or sets a value indicating whether the rendering engine should
try to keep the on one page
if possible.
A boolean value indicating whether the rendering engine should
try to keep the on one page
if possible.
Represents a parameter of nested report (subreport)
Represents a collection of objects.
Creates a with specific settings and
adds it to the
.
A value that will be used as
for the newly created
.
A value that will be used as
for the newly created
. May be expression.
The newly created and added
Adds an enumerable of objects to the
.
An enumerable of objects to add to
the .
The objects returned from the
enumerable are appended to the end of the
.
Determines whether the
contains a parameter with a specific name.
A that specifies the parameter name for which
to search the elements of the
.
Returns a value indicating whether the
object contains a
parameter with the specified name.
Determines the index of a specific parameter in the
.
The parameter name used to locate the
parameter in the .
The index of parameter if found in the
; otherwise, -1.
Gets a by name.
The name of the parameter.
A parameter if found; otherwise null (Nothing)
Represents a picture box report item for displaying an image.
Gets or sets the value associated with this .
A that starts with "=" is interpreted as data expression;
that holds an image data.
Gets or sets the sizing mode of the
.
A object
that specifies the sizing mode of the
.
Gets or sets a string that contains the picture box's Multipurpose
Internet Mail Extensions (MIME) type.
A string that contains the picture box's Multipurpose Internet Mail
Extensions (MIME) type.
This member overrides
.
A object that defines
the default size of the .
It is 100 pixels wide by 100 pixels high by default.
Used in ReportObject
Used in ReportObject
Represents the base class for any report in the Telerik Reporting.
All reports created with Telerik Reporting inherit from the
class. The Report
comprises of one or more report sections which contain report items.
Initializes a new instance of the
class with default settings.
Raises the
event.
The report being processed.
An that contains event data.
Occurs when the processing of the report processing instance (i.e., instance) begins
and this instance has no property set.
The event is hooked on the definition instance,
but the sender object in the event handler is the processing instance.
The processing instance of the report inherits its DataSource from the definition instance,
but if neither has DataSource set, this event is raised.
The following example demonstrates how to implement a NeedDataSource event handler:
- A
- A
- A
- A
- Any component that implements the
interface
- Any component that implements the
interface
- Any component that implements the
interface
If the DataSource reference contains more than one table,
you must set the DataMember property a string that specifies
the table to bind to. For example, if the DataSource is a
DataSet or DataViewManager that contains three tables
named Customers, Orders, and
OrderDetails, you must specify the table to bind to.
Setting the DataSource to an object that does not implement
the IListSource, IEnumerable, or IDataAdapter
will cause an exception.
Gets a
that defines the filter expression(s) for the
A
that contains the
objects for
the Report
Filter expressions limit the data that is displayed to the user
after the data is retrieved from the data source.
Gets a
that defines the sort column(s), and their type and order for the
A
that contains the
objects for the
Report
Sort expressions sort the data that is displayed to the user
after the data is retrieved from the data source.
Gets a
that defines the groups for the
A
that contains the
objects for the Report
Grouping is used to gather all rows that match certain grouping
criteria together. Grouping criteria is defined by adding one or
more objects
to a .
Gets or sets a representing the name
of the report document.
A representing the document name. The
default value is the name of the
this property belongs to.
The value of this property is used to suggest a file name when
exporting a report to one of the available export formats.
A that starts with "=" is interpreted
as an expression to evaluate the document name; otherwise it is
interpreted as a literal string.
Gets or sets a
for the .
A representing
the page numbering style. The default value is
When the report is part of a
, use this property to
indicate whether the page numbering / count should start from 1 or continue
from the last page number / count of the previous report.
Represents a collection of
objects.
Represents a collection of reports logically unified as a single
document.
Initializes a new instance of the
class with default
settings.
Initializes a new instance of the
class from the provided
reports.
Initializes a new instance of the
class from the provided
reports and document name.
Gets the collection of reports that are parts of this ReportBook.
Gets the reports contained in the ReportBook.
Gets or sets a representing the name
of the document.
A representing the document name. The
default value is the Type name of the
this property belongs to.
The value of this property is used to suggest a file name when
exporting to one of the available export formats.
A that starts with "=" is interpreted
as an expression to evaluate the document name; otherwise it is
interpreted as a literal string.
For internal use only.
Gets the s of the
. Parameters are obtained
by merging the parameters of individual reports that have their
Mergeable property set to true plus adding all non-mergable
parameters.
Represents a base class for collection of objects.
Adds an enumerable of objects to the
.
An enumerable of objects to add to
the .
The objects returned from the
enumerable are appended to the end of the
.
Determines whether the
contains a report parameter with a specific name.
A that specifies the parameter name for which
to search the elements of the
.
Returns a value indicating whether the
object contains a report
parameter with the specified name.
Determines the index of a specific report parameter in the
.
The parameter name used to locate the report
parameter in the .
The index of report parameter if found in the
; otherwise, -1.
Gets a report parameter by name.
The name of the report parameter.
A report parameter if found; otherwise null (Nothing)
Represents a merged parameter, that is many identical parameters
represented by a single object. All child parameters should have the
same Name and Type, which effectively becomes the Name and Type of
the MergedReportParameter. The UI of the MergedReportParameter is
the UI of its FIRST child parameter.
Represents a collection of
objects.
Adds an array of report objects to the collection.
A collection of objects to add to
the current collection.
The Report objects contained in the items array are
appended to the end of the collection.
Represents a report footer section. Report footer is displayed at the
end of a report, but before the last
if any.
If you do not want a
displayed on the last page set the
property to false.
Represents a report header section. Report header is displayed at the
beginning of a report, but after the first
if any.
If you do not want a
displayed on the first page set the
property to false.
Represents a report parameter.
Initializes a new instance of the class.
Initializes a new instance of the class.
Gets or sets the name of the parameter. Used to access the parameter.
Parameter names must be unique in the context of a single report.
The name must be a valid identifier - may contain only digits (0-9), letters (a-z, A-Z),
and underscore sign (_). Must begin with a letter or underscore.
Gets or sets the data type of the parameter.
Determines the type of the values. Acceptable values for each type are listed in .
The default parameter type is .
Gets or sets the value of the parameter. Can be an Expression that
evaluates to an object, value of the allowed types,
or containing values of the allowed types.
Gets or sets a value indicating whether this parameter should be
merged with identical parameters from other reports when this report
is part of a .
Controls parameter merging in .
The default value of the Mergeable property is true.
Set the Mergeable property to false if you want to prevent a parameter
from being merged with its equivalent ones.
Gets or sets the text for the parameter's automatic UI displayed in the report viewer.
Can be an Expression that evaluates to a string.
The Text property specifies the text for the parameter to be displayed
in the report viewer as prompt to the end user.
If value for the property is not provided the
of the parameter is used.
Determines whether automatic user interface (UI) prompting for values
to be generated for the parameter.
Specifies whether the parameter will have UI in the parameters area.
When at least one report parameter has the Visible property turned on,
a parameter area is shown as part of the report viewer.
If this property is set to false, the parameter must be populated
programmatically or at design time.
Determines if the parameter can hold more then one value.
If the value is set to true as a valid value of the parameter is accepted
an of values
of the specified of the parameter.
Parameters with MultiValue turned on are mainly used with the IN logical operator.
Determines if the parameter allows no value to be passed from it's
editor.
Only if this property is set to false null (
Nothing in VB) are considered as valid values of the
parameter.
Gets or sets a value that indicates whether an empty string is a valid value for the parameter.
Only for parameters of String.
Gets an object that defines a set of valid values the parameter can accept from.
The available values, or valid values, are a set of predefined values
which are acceptable as value of the parameter.
Each available value may have label that will be displayed if the parameter is visible.
Determines whether to trigger the report preview after changing the value for a parameter.
Applies only for visible parameters.
If this property is set to true, the report viewer will trigger
the report preview automatically when the parameter value is changed.
The parameter should be visible in order to auto preview the report.
Represents the available values for a
The available values, or valid values, are a set of predefined values
which are acceptable as value of the parameter.
Each available value may have label that will be displayed if the parameter is visible.
Gets or sets a string that specifies the property of the data source from which to draw the value labels.
Specifies a column name, expression, or
embedded expression
based on the
schema.
It is used as label in the value/label pair.
If omitted the ValueMember will be used as
as well.
Optional.
Gets or sets a string that specifies the field of the data source from which to draw the values.
Specifies a column name, expression, or
embedded expression
based on the
schema.
It is used as value in the value / label pair.
Gets or sets the data source used for retrieving the value / label pairs
of the available values.
For backwards compatibility reasons Telerik Reporting supports binding directly to
IEnumberable/IListSource objects (incl. arrays, collections, DataSet, DataTable,
DataView, and DbDataAdapter).
Instead consider using the
component that can handle these types of data sources.
Gets a FilterCollection that defines the filter expression(s).
Gets a SortingCollection that defines the sort column(s), and their type and order.
Represents a collection of objects.
Creates a with specific settings and
adds it to the
.
A value that will be used as
for the newly created
.
A value that will be used as
for the newly created
.
A value that will be used as
for the newly created
. May be expression.
The newly created and added
Inserts an item to the at
the specified index.
The zero-based index at which item should be
inserted.
The to insert into
the .
Values of type are accepted.
Values of type are accepted.
Values of type , ,
or are accepted. Internally the values are converted to .
Values of type or are accepted. Internally the values are converted to .
Values of type are accepted.
Gets or sets the text for the parameter to be displayed in the report viewer.
Determines whether the parameter user interface is visible.
Determines if the parameter can hold more then one value.
Determines if the parameter allows no value to be passed from it's editor.
Determines if the parameter allows an empty string to be passed. Only for parameters of type string.
Gets an object that defines a set of values the parameter can accept from.
Provides the base class for a report source. This is an abstract class
that contains only a collection of parameter values that are passed to the
object when its instance is initialized.
Determines the parameter values that are passed to the object when its instance is initialized.
The parameter name must match the name of the of the
in order the value to be passed correctly.
Represents a report source that loads a report document from a URI.
The following example demonstrates how to create a UriReportSource:
// Create an instance of the report to print.
IReportDocument reportDocument = new MyReport();
// Obtain the settings of the default printer.
PrinterSettings printerSettings = new PrinterSettings();
// Adjust the printer settings if necessary...
// Print the report using the printer settings.
ReportProcessor.Print(reportDocument, printerSettings);
' Create an instance of the report to print.
Dim reportDocument As IReportDocument = New MyReport()
' Obtain the settings of the default printer.
Dim printerSettings As New PrinterSettings()
' Adjust the printer settings if necessary...
' Print the report using the printer settings.
ReportProcessor.Print(reportDocument, printerSettings)
Renders a report in the specified format
Export format
Report document to render.
Contains parameters to pass to the rendering extension.
The MIME type of the result buffer.
The file extension of the result buffer.
The character encoding of the result buffer.
Byte array that contains the rendered report.
Renders a report in the specified format
Export format
Report document to render.
Contains parameters to pass to the rendering extension.
The MIME type of the result buffer.
The name of the created document.
The file extension of the result buffer.
The character encoding of the result buffer.
Byte array that contains the rendered report.
Renders a report in the specified format
Export format
Report document to render
Contains parameters to pass to the rendering extension.
The delegate function to call to get a stream to render into.
True if the rendering succeeds.
Renders a report in the specified format
Export format
Report document to render
Contains parameters to pass to the rendering extension.
The delegate function to call to get a stream to render into.
The name of the created document.
True if the rendering succeeds.
Prints a report document using the specified printer settings.
Specifies the for the report document to print.
Specifies the printer settings to be used when printing the document.
If null or invalid settings are specified, the Print Dialog appears.
To prevent the Print Dialog from appearing, you should specify valid
printer settings to this method.
This example illustrates how to prevent the standard Print Dialog from
appearing in a batch print operation or when printing from a service.